Configuration register 0 for channel 4
TIMER_SEL | This field is used to select one of timers for channel %s. 0: select timer 0. 1: select timer 1. 2: select timer 2. 3: select timer 3. |
SIG_OUT_EN | Set this bit to enable signal output on channel %s. |
IDLE_LV | This bit is used to control the output value when channel %s is inactive. |
PARA_UP | This bit is used to update register LEDC_CH%s_HPOINT and LEDC_CH%s_DUTY for channel %s. |
OVF_NUM | This register is used to configure the maximum times of overflow minus 1. The LEDC_OVF_CNT_CH%s_INT interrupt will be triggered when channel %s overflows for (LEDC_OVF_NUM_CH%s + 1) times. |
OVF_CNT_EN | This bit is used to enable the ovf_cnt of channel %s. |
OVF_CNT_RESET | Set this bit to reset the ovf_cnt of channel %s. |
OVF_CNT_RESET_ST | This is the status bit of LEDC_OVF_CNT_RESET_CH%s. |